A series circuit has more than one resistor (anything that uses electricity to do work) and gets its name from only having one path for the charges to move along. Charges must move in "series" first going to one resistor then the next. If one of the items in the circuit is broken then no charge will move through the circuit because there is only one path. There is no alternative route.
Load definedThe light bulb is considered a load in this circuit. You might think of a load as anything that is using the energy that is being delivered by the electric current in a circuit. It could be anything from a light bulb to a computer to a washing machine and so on.
The light bulb in the first circuit was actually acting like a resistor because it only allowed a certain amount of current to flow through it. If there are no resistors or components that act like resistors to slow the flow of electrical current, too much current may flow through the circuit and damage its components or wires. Too much current flowing through a component results in the generation of heat that can melt the conductive path through which the electrons are flowing.
We cannot see any work being done since there is no light bulb, but there is current actually flowing inside. We know the current is flowing because the ammeter is indicating this. It is important to know that we may not be able to tell whether current is flowing through a circuit without test equipment, such as our ammeter connected to the circuit. Electricity can be very dangerous and experiments like these should never be conducted without adult supervision. Never work with electricity unless you are trained to know how to work with it safely.Review
- When all the components are in line with each other and the wires, a series circuit is formed.
- A load is any device in a circuit that is using the energy that the electron current is delivering to it.
